DirecTV HR20 User Manual

CHAPTER 6 - Settings
103
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Network Setup
Select “Network Setup” to setup and test the connection of your DVR
to the Internet. See Appendix 2, “How to Network Your HD DVR” for
details.
High-Definition DVRs
When the MODE switch on your remote is in the left-most position, it controls
your DIRECTV Receiver. However, you can also program the AV1, AV2 and TV
positions to control other equipment such as your TV, DVD, VCR or Stereo.
For Standard-Definition DVRs select “Remote” and then select either “Program
Remote”, “IR/RF Setup”, or “Receiver Mode”.
Remote Control
System Setup
Follow the step-by-step instructions to set your remote to control your TV
or other A/V equipment such as, a DVD player or surround sound system.
For best results, it is helpful to know the model number and brand of your
equipment.
This is also where you’ll have the option to “Reset Remote” which clears
the AV1, AV2 and TV modes.
Program Remote

DirecTV HR20 Specifications

General

Brand	DirecTV
Model	HR20
Category	DVR
Language	English