DirecTV HR20 - Page 115

CHAPTER 7 - Help & Troubleshooting
115
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Possible Causes:
- A scheduled recording may be about to begin, so the receiver is changing channels to record the show as requested.
- Your TV’s timer may have been activated.
Solution:
- Check your To Do List to see if there are other scheduled recordings. Press MENU, select “Manage Recordings”, then “To Do list”.
- Check your TV owner’s manual to turn off the TV’s timer.
Solution:
Blank screen
There is nothing on your TV screen.
Possible Causes:
- Your TV and/or your receiver are not powered on.
- Your receiver may be hooked up to the TV incorrectly.
- You may be on the wrong video source for your DIRECTV
®
Receiver.
- You may be tuned to a channel that is not currently broadcasting, or that you don’t subscribe to.
- Check that DIRECTV DVR and TV are both powered on.
- Read Chapter 6, “Connections for Auxiliary Equipment” for instructions about connecting your receiver.
- Press the INPUT button on the TV remote control to change video source.
- Try another channel and see if you have live video.
- Press the POWER button on the front panel of the DIRECTV
®
Receiver.
- Press the red RESET button behind the door on the front panel of the receiver.
Frequently Asked Questions