Dish Network DISH 1000.2 - DISH 500+ Repoint Kit for SuperDISH Type I

Dish Antennas - DISH 500+ Repoint Kit for SuperDISH Type I 2 - 11
DISH 500+ Repoint Kit for
SuperDISH Type I
• Converts an existing Type I SuperDISH reflector to function as a DISH
500+, which receives signal from the 110°, 118.7°, and 119° orbital
locations, or as a DISH 1000+, which adds the 129° orbital location.
• Includes the DP 500+ LNBF Assembly.
• Replaces the SuperDISH LNBF Assembly and shroud, but uses the
existing reflector.
• Includes an FSS/DBS Dual Band LNBF for reception of 119° and
118.7°; 110° is received from a separate DP Dual (or DP Single).
• A bracket for upgrading the DISH 500+ to a DISH 1000+ is included in
the Kit; however, the LNBF for 129° must be purchased separately.
• Reuse the screws, bolts, and washers that held the SuperDISH LNBF
Assembly to attach the DISH 500+/DISH 1000+ Repoint Kit LNBF
Assembly to the antenna feed arm.
SuperDISH to DISH 500+ Repoint Kit
SuperDISH to DISH 1000+ Repoint Kit
1000+ Bracket for 129° Orbital Location