Dish Network DISH 1000.2 - DISH 1000 Repoint Kit for SuperDISH Type I

Dish Antennas - DISH 1000 Repoint Kit for SuperDISH Type I 2 - 12
DISH 1000 Repoint Kit for SuperDISH Type I
• Converts an existing Type I SuperDISH reflector to function as a
DISH 1000, which receives signal from the 110°, 119°, and 129°
orbital locations.
• Replaces the SuperDISH LNBF Assembly, shroud, and LNBF Arm,
but uses the existing reflector.
• Includes a SuperDISH Three-LNBF bracket, LNBF Arm, and the
necessary hardware to attach the arm, bracket, and LNBFs.
• Uses three DP Duals or Singles (not included), which are then
connected to the existing switch.
SuperDISH to DISH 1000 Repoint Kit
LNBF Assembly
Repoint Kit LNBF Arm