Dish Antennas - 1000.4 Repoint Kit for DISH 500+ 2 - 13
1000.4 Repoint Kit for DISH 500+
• Converts a DISH 500+ reflector to function as an 1000.4 Dish
Antenna, which receives signal from the 61.5°, 72.7°, and 77° orbital
locations.
• Replaces the DISH 500+ LNBF Assembly and LNBF Arm, but uses
the existing reflector.
• Uses the same LNBF Arm as the 1000.4 Dish Antenna, which
includes the “keying” feature to ensure only 1000.4 parts are used
together.
• Uses the DP Plus 1000.4 LNBF for reception of 61.5°, 72.7°, and 77°.
• If converting from a DISH 500+ installation that used a DISH Pro 34
Switch, the DP34 must be removed from the installation and the DP
Plus 1000.4 LNBF should be connected directly to the receivers (or to
a DP Plus 44 switch, if more than four receivers are installed).
To Next Page
Loading...
