9
When the scan is complete, the
Acquiring Signal message will display.
Acquiring the signal may take up to 5
minutes to complete.
6. After your receiver has acquired the signal,
it is ready to be activated. If your receiver
packaging has a specic phone number
displayed, be sure to call this number to
activate your service. Otherwise, call
1-800-333-DISH (3474) to activate.
After your receiver is activated,
the electronic program guide will download.
This may take up to 5 minutes to complete
(potentially longer if an external hard drive
is connected).
This completes the setup for new receivers. You may now use
STANDARD TAILGATER OPERATION starting on the next page for subsequent use.
To Next Page
Loading...
