10
1. Use the arrow buttons on your remote to
highlight the letter group that includes the
rst letter of the state you are currently in.
Press SELECT on your remote.
IN STEPS 1-5, DO NOT BLOCK THE TAILGATER’S LINE OF SIGHT TO THE
SATELLITES IN THE SOUTHERN SKY AT ANY TIME!
After hooking up and turning on your equipment as instructed in TAILGATER SETUP, the Mobile
Antenna Setup screen will display. (It may take up to two minutes to display.)
Note: If the Mobile Antenna Setup screen does not display, press MENU, 6, 1, 1 on your
remote. Highlight the “Check Switch” Button then press SELECT on your remote.
STANDARD TAILGATER OPERATION
To Next Page
Loading...
