Dish Network Tailgater - Tailgater Operation

6
1. Point your receiver’s remote at the front of
the receiver and press SAT.
Press RECORD.
When a number appears in the box,
verify CONTINUE is highlighted.
Press SELECT on your remote.
The Portable Antenna Setup screen
will display.
IF YOU ARE USING A NEW RECEIVER WITH THE TAILGATER, YOU MUST FOLLOW
THE FIRST TIME SETUP PROCEDURE STARTING BELOW.
AFTER THIS FIRST TIME PROCEDURE, YOU CAN USE “STANDARD TAILGATER
OPERATION” STARTING ON PAGE 10.
TAILGATER OPERATION
FIRST TIME TAILGATER OPERATION WITH NEW RECEIVER