100sx Operator’s Manual Transport - 41
Tie Down
Unload
1. Lower trailer or ramps.
2. Remove chains from tiedowns.
3. Start plow. See page 34 for proper start-up procedures.
4. Slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Unload unit with engine in low idle.
• Unload trailer on level ground.
• Attach trailer to vehicle before loading or unloading.
• If trailer tilts, ensure that tilt latch is secured in the correct position.
To Next Page
