XT1600 Operator’s Manual Overview - 3
Intended Use
CMW
Intended Use
The XT1600 is a ride-on, track-driven excavator/tool carrier unit designed for light- to medium-duty
construction work. The XT1600 excavator allows 260° swing and digging depths to 11’ 2” (3.4 m). The
XT1600 lift arms have a quick attach mount plate which makes it easy for an operator to connect different
attachments. The unit is designed for operation in temperatures typically experienced in earth moving and
construction work environments. Provisions may be required to operate in extreme temperatures. Contact
your Ditch Witch dealer.
Use in any other way is considered contrary to the intended use.
The XT1600 should be operated, serviced, and repaired only by persons familiar with its particular
characteristics and acquainted with the relevant safety procedures.
Unit Components
1. excavator
2. ROPS/FOPS
3. operator’s station
4. engine compartment
5. lift arms
6. tracks
7. attachment mount plate
8. excavator stow lock
To Next Page
Loading...