Transport - 54 XT1600 Operator’s Manual
Haul
CMW
Unload
1. Lower ramps.
2. Remove tiedowns.
3. Start engine.
4. Ensure work mode switch is in tool carrier mode.
5. Raise mount plate.
6. Slow engine to low throttle and slowly back unit down ramps.
Unhitch Trailer
1. Stop tow vehicle and trailer on level ground.
2. Put unit in excavator mode. Turn off ignition.
3. Block trailer wheels.
4. Reverse “Hitch Trailer “ steps to unhitch trailer from tow vehicle.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
NOTICE:
• Load and unload trailer on level ground.
• Ensure trailer wheels are blocked.
• Attach trailer to vehicle before loading or unloading.
To Next Page
Loading...