XT1600 Operator’s Manual Drive - 45
Drive
CMW
Drive
General Operation
1. Verify that excavator boom lock is engaged.
2. Adjust throttle as needed.
3. Ensure that work mode switch is in tool carrier mode.
4. Use right joystick to raise mount plate (and attachment) off ground.
5. Move ground drive joystick to forward or reverse. See “Joysticks” on page 27.
NOTICE: When driving unit more than a few feet (meters), pivot seat so that operator is facing lift arms.
If operator is facing excavator, operation of track drive controls is reversed.
To Next Page
Loading...