Drive - 44 XT1600 Operator’s Manual
Start Unit
CMW
Start Unit
1. Fasten and adjust seat belt.
2. Ensure all controls are in neutral.
3. If necessary, use glow plug button to warm cold engine. See page 21.
4. Turn ignition switch to start position and release when engine starts.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
IMPORTANT:
• After starting in cold temperatures, allow unit to warm up by running it at low throttle for
several minutes.
• When working in low ambient temperatures, pay special attention to fuel, oil viscosity,
antifreeze, and water adhering to filter.
To Next Page
Loading...