XT1600 Operator’s Manual Transport - 55
Tow
CMW
Tow
Under normal conditions, unit should not be towed. If unit breaks down and towing is necessary:
• Do not tow for more than 200 yd (180 m).
• Tow at less than 1 mph (1.6 km/h).
• Use maximum towing force of 1.5 times unit weight.
Procedure
Prepare for Towing
1. Attach tow line to available tow points facing
towing vehicle.
2. Disengage track planetaries:
• For normal operation, plate faces outward
(B).
• Remove top and bottom bolt from cover
plate (shown).
• Reverse cover plate so that indention
faces inward (A).
• Install bolts.
To Next Page