Service - 72 XT1600 Operator’s Manual
Service Precautions
CMW
Service Precautions
Working Under Raised Lift Arms
Before working under raised lift arms, stop engine,
remove stow lock from storage location and place
into position (shown), start engine, and lower arms
until props support lift arms.
To return to normal operation, start engine, raise lift
arms slightly, stop engine, and move stow locks into
stowed position.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
NOTICE: Unless otherwise instructed, all service should be performed with engine off.
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away.
To Next Page
Loading...