In the event of a fault or power failure, insert the key
and turn it anticlockwise and completely open the
hatch. Open the gate manually.
To block the gate again, close the hatch, turn the key
clockwise and remove the key.
Manual release instructions
WARNING: the door wing block and release opera-
tions must be performed with the motor idle.
When the hatch is closed, but the key is still hori-
zontal, the release micro remains open and all gate
operations are prevented.
For any problems and/or information, contact the support service.
Installer’s stamp Operator
Date of intervention
Technician’s signature
Customer’s signature
Intervention:
DETACH AND DELIVER TO THE CUSTOMER
90°
To Next Page
Loading...
