4. Standard installation
Ref. Code Description
1 Ditec CROSS18
Ditec CROSS18E
Ditec CROSS18VE
Ditec CROSS19V
230V gearmotor with rotary limit switch
230V gearmotor with lever limit switch / built-in control panel
230V gearmotor with magnetic limit switch / built-in control panel
400V gearmotor with magnetic limit switch
2 GOL4
GOL4C
Transmitter
3 LAMP Flashing light
4 XEL5
LAN4
GOL4M
Key selector
Control keyboard
Codified via radio control keyboard
5 XEL2
LAB4
Photocells
Photocells IP55
6 SOFA-SOFB
GOPAV
Safety edge
Radio system for safety edges
7 LAB9 Magnetic loop detection device for traffic monitoring
A Connect the power supply to an approved omnipolar switch with an opening
distance of the contacts of at least 3mm (not supplied).
The connection to the mains must be made via an independent channel,
separated from the connections to command and safety devices.
1 A
4
7
2
6
3
5
5
To Next Page
Loading...
Need help?
General
