Electromagnetic immunity (EMI)
47
• Strong electromagnetic interference usu-
ally occurs when there is a relatively dry
operating environment. This can have the
following effects on the device:
- the device stops emitting;
- the device turns off;
- the device restarts;
The aforementioned phenomenon does not
have any effect on the basic safety and per-
formance of the device. The user can use it as
described in the manual. If you wish to pre-
vent the aforementioned phenomenon, use
the device in the environment specified in the
manual.
Table 1
Explanation – electromagnetic emissions
The device is intended for use in the electro-
magnetic environment specified below. The
customer or the user of the device should en-
sure that it is used in such an environment.
Emissions
test
Conformity Electromagnetic en-
vironment manual
RF
emissions
CISPR 11
Group 1 The device only
uses RF energy for
its internal func-
tion. Therefore, its
RF emissions are
very low and are
not likely to cause
any interference in
nearby electronic
equipment.
To Next Page
Loading...