Basic functions
30
• If you briefly push the buttons ( )
for ear measurement and (
)for
forehead measurement at the same
time in memory or configuration
mode, the thermometer will switch
back to standby mode and the time,
date and room temperature will be
shown in alternation. It will also au-
tomatically switch to standby mode
after approx. 30 seconds of button
inactivity.
Memory mode
The thermometer saves the last 9 body tem-
perature measurements in your ear or on your
forehead. The current measurement will ap-
pear last in the memory. If all 9 memory slots
are occupied, the oldest measurement will be
deleted from the memory.
− In standby mode, hold the
thermometer so that the
back of the thermometer
points towards you to
display the saved mea-
surements and push the
MEM button
9
.
The memory indicator (
)
15
and the
number for the last measurement saved
(e.g. 8) will now briefly appear on the LCD
display.
To Next Page
Loading...