Operation
35
the LCD display
1
. At the same time, the
backlight
2
of the LCD display will light up
indicating the range of the measured tem-
perature (see chapter “Indicators for body
temperature”).
8. Carefully remove the probe tip
4
of the
thermometer from your outer ear canal
and read the measured temperature on
the LCD display. The symbol (
) indicates
that the temperature in your ear has been
measured. It is only possible to perform
a new measurement after the backlight
has gone out (you must wait approx. 6
seconds).
Wait until the measurement has
been saved and no circles are visi-
ble on the LCD display.
Measuring forehead temperature
Measure your temperature on your
forehead and, if possible, always in the
same way for consistent measurement
results.
1. Fit the push-on adapter for measuring
forehead temperature
5
on the ther-
mometer so that it is secure.
2. Before performing the measurement, make
sure that the infrared sensor is clean. Hold
the thermometer with your thumb on the
button (
) for forehead measurement
6
,
but do not push the button (
) yet.
To Next Page
Loading...