Dittmann Caretalk TH1071 - Measuring Object Temperature

Operation
37
At the same time, the backlight
2
will
light up indicating the range of the mea-
sured temperature (see chapter “Indicators
for body temperature”).
5. Carefully remove the probe tip
4
of the
thermometer from your forehead and
read the measured temperature on the
LCD display. The symbol (
)
19
indicates
that your forehead temperature has been
measured. You can now immediately start
a new measurement.
If you want to immediately switch
back to standby mode, you can brief-
ly push the MEM button. It will also
automatically switch back to standby
mode after approx. 1minute of button
inactivity.
Measuring object temperature
Please note: This method of performing mea-
surements is not suitable for measuring body
temperature.
1. Before measuring the temperature of an
object (liquid/surface), remove the push-
on adapter for measuring forehead tem-
perature from the thermometer.