dji Agras T25

AGRAS T50/T25
Unmanned Aircraft Flight Manual
28
©
2023 DJI All Rights Reserved.
1. Field List/Task Settings
Tap to expand the list.
When the aircraft is not performing any operations, the field list will be displayed, users can
view the planned fields and the operations being executed.
When an operation has been applied or started, the task settings will be displayed where
users can set operation parameters. The adjustable parameters vary between different
operation modes.
2. FPV Camera View
Displays the live view from the FPV camera. Tap to switch between Map View and FPV
Camera View. Tap the icon on the upper right side of Operation View and select Aircraft
Heading in the dropdown menu. The gridlines will be displayed in the FPV camera view.
3. Overhead Obstacle Indicator
If obstacle avoidance is enabled, a red zone will appear at the top of the screen when an
overhead obstacle is detected. The distance between the obstacle and the aircraft will also
be displayed.
4. Radar Indicator
Displays information such as the orientation of the aircraft and the Home Point. When
Obstacle Avoidance is enabled, a frame will appear inside the radar indicator once detecting
horizontal obstacles and the obstacle bar in the left of the radar indicator will show
information of the detected vertical obstacles. Red, yellow, and green zones indicate the
relative distance of the obstacles ranging from near to far. The value indicates the distance
in meters or feet depending on the settings. Tap the radar indicator to enable or disable
obstacle avoidance, altitude stabilization, or bypassing. There will be a red circle around the
radar indicator when these functions are disabled.
H
E
n
d
P
a
u
s
e
2
k
m
3
3
.
2
4
0
.
0
/
L
R
T
K
1
6
1
0
0
%
T
a
s
k
i
n
p
r
o
g
r
e
s
s
.
R
o
u
t
e
m
o
d
e
1
2
.
3
F
l
o
w
m
i
n
L
/
6
5
.
1
2
C
o
v
e
r
e
d
H
a
4
.
2
m
A
l
t
i
t
u
d
e
2
.
5
s
/
m
S
p
e
e
d
1
6
4
.
9
m
D
i
s
t
a
n
c
e
1
.
2
2
.
2
1
2
3
4 5
6