dji FPV User Manual

DJI FPV
User Manual
57
© 2021 DJI All Rights Reserved.
7. Slightly bend the side of the top shell to insert the buckle into the aircraft slot and tighten the four M2 screws
on both sides.
8. Install the protective shell from the top and make sure to align the slots. Tighten the four M2 screws on the
front to complete the installation.
1
1
2
2
Calibrating the gimbal and camera
After replacing the gimbal and camera, download the calibration le of the camera to calibrate the gimbal and
camera.
1. Power on the aircraft, goggles, and remote controller. Make sure all the devices are linked.
2. Connect the USB-C port of the goggles to the mobile device, run DJI Fly, and follow the on-screen instructions
to download the camera calibration le to the aircraft. An internet connection is required for downloading.

dji FPV Specifications

General

Product type	Battery
Compatibility	FPV Drone
Product color	Black
Brand compatibility	DJI
Battery voltage	22.2 V
Battery capacity	2000 mAh
Battery LED indicator	Yes
Minimum operating temperature	5 °C
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	295 g