dji FPV User Manual

DJI FPV
User Manual
66
© 2021 DJI All Rights Reserved.
Updating Firmware
Use DJI Fly or DJI Assistant 2 (DJI FPV series) to update the rmware.
Using DJI Fly
After powering on the aircraft, goggles, and remote controller, make sure that all devices are linked. Connect
the USB-C port of the goggles to the mobile device, run DJI Fly, and follow the prompt to update. An internet
connection is required.
Using DJI Assistant 2 (DJI FPV series)
Use DJI Assistant 2 (DJI FPV series) to update the aircraft, goggles, or remote controller separately.
1. Power on the device and connect it to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (DJI FPV series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left-hand side.
4. Select the rmware version required.
5. DJI Assistant 2 (DJI FPV series) will download and update the rmware automatically.
6. The device will restart automatically after the rmware update is complete.
Make sure to follow all the steps to update rmware. Otherwise, the update may fail.
The rmware update will take approximately 11 minutes. When updating the rmware, it is normal for
the gimbal to go limp, and the aircraft to reboot. Wait until the update is complete.
Make sure the computer is connected to the internet.
Make sure that the device has sucient power before updating rmware. Before performing an update,
make sure the Intelligent Flight Battery is at least 43% charged and the goggles battery and the remote
controller are at least 30% charged.
Do not unplug the USB-C cable during an update.
If there is an additional battery that needs to be updated after the update is complete, insert it into the
aircraft and power on the aircraft. A prompt will appear in the goggles to update the battery. Make sure
to update the battery before takeo.
Note that the update may reset various ight parameters such as the RTH altitude and the maximum
flight distance. Before updating, take note of your preferred settings and readjust them after the
update.
After-Sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and support.

dji FPV Specifications

General

Product type	Battery
Compatibility	FPV Drone
Product color	Black
Brand compatibility	DJI
Battery voltage	22.2 V
Battery capacity	2000 mAh
Battery LED indicator	Yes
Minimum operating temperature	5 °C
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	295 g