dji FPV User Manual

39
© 2021 DJI All Rights Reserved.
Remote Controller
Built into the DJI FPV Remote Controller 2 is DJI's O3 transmission technology, oering a maximum transmission
range of 6 mi (10 km). The buttons make control of the aircraft and camera eortless while the detachable control
sticks allow for the remote controller to be easily stored.
The built-in battery has a capacity of 5200 mAh and a maximum run time of 9 hours.
Operation
Powering On/O
Press the power button once to check the current battery level. If the battery level is too low, recharge before use.
Press once then press again and hold to power the remote controller on or o.
Charging the Battery
Use a USB-C cable to connect an AC power adapter to the USB-C port of the remote controller. It takes
approximately 2.5 hours to fully charge the remote controller.
Controlling the Gimbal and Camera
1. Shutter/Record Button: press once to take a photo or to start or stop recording. Press and hold to switch
between photo and video mode.
2. Gimbal Dial: use to control the tilt of the gimbal.
Gimbal Dial
Shutter/Record Button

dji FPV Specifications

General

Product type	Battery
Compatibility	FPV Drone
Product color	Black
Brand compatibility	DJI
Battery voltage	22.2 V
Battery capacity	2000 mAh
Battery LED indicator	Yes
Minimum operating temperature	5 °C
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	295 g