http://www.dji.com/zenmuse-l1
Copyright © 2022 DJI All Rights Reserved.
41
You can start multiple point cloud processing tasks at the same time. Before the first task is
completed, the other tasks will be pending in the queue. Tasks are processed in the order they were
started and will be started one by one after all prior tasks are completed.
(8) View Results
After the reconstruction is completed, you can move, zoom, rotate, or perform other actions on the
result. You can also switch between different views:
RGB: Display the result in their true colors.
Intensity: Display the result based on the reflectivity received by the LIDAR. The reflectivity is graded
on a scale of 0-255, where 0–150 corresponds to diffuse reflection objects with a reflectivity of 0–
100%, and 151–255 corresponds to total reflectivity objects. Since light reflected by the same object
may be received by the LiDAR at different angles, the reflectivity values of the same ground object
may vary as shown on the reflectivity map. This is a normal phenomenon.
Height: Display different colors for different altitudes of the point cloud.
Return: Display different colors for result data of different echos.
(9) Quality Report
The quality report for LiDAR point cloud processing is interpreted as follows:
To Next Page
