dji L1 - Scan Mode and FOV

http://www.dji.com/zenmuse-l1
Copyright © 2022 DJI All Rights Reserved.
8
2.3.3 Scan Mode and FOV
The L1 can produce different scan shapes in different scan modes. Please note that the shape formed
by the LiDAR on the ground is determined by the laser scan mode, the flight direction and speed, and
the terrain. The Livox LiDAR on DJI L1 supports non-repetitive scan mode and repetitive scan mode.
Figure: Scan shapes formed in 0.1s with repetitive scan mode of L1
Figure: Scan shapes formed in 0.1s, 0.2s, 0.5s, and 1s with non-repetitive scan mode of L1