dji MATRICE 30 Series - Mounting the Strap and Bracket Kit

54
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Mounting the Strap and Bracket Kit
A strap and bracket (excluded) can be mounted onto the remote controller in the following steps.
1. Mount the bracket on the remote controller with two screws.
2. Unfold the two handles.
3. Wear the strap, and attach the strap hooks to the handle holes.
After use, hold the remote controller with one hand, unlock the strap hooks with the other hand
to remove the remote controller, and then take o the strap.