dji MAVIC 3 PRO

DJI Mavic 3 Pro User Manual
©
2023 DJI All Rights Reserved.
23
GEO Zones
DJI’s GEO system designates safe flight locations, provides risk levels and safety notices for
individual flights and offers information on restricted airspace. All restricted flight areas are
referred to as GEO Zones, which are further divided into Restricted Zones, Authorization Zones,
Warning Zones, Enhanced Warning Zones, and Altitude Zones. Users can view such information
in real-time in the DJI Fly app. GEO Zones are specic ight areas, including but not limited to
airports, large event venues, locations where public emergencies have occurred (such as forest
res), nuclear power plants, prisons, government properties, and military facilities. By default,
the GEO system limits takeos and ights in zones that may cause safety or security concerns.
A GEO Zone map that contains comprehensive information on GEO Zones around the globe is
available on the ocial DJI website: https://y-safe.dji.com/nfz/nfz-query.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully
charged.
2. Make sure the Intelligent Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft arms are unfolded.
4. Make sure the gimbal and camera are functioning normally.
5. Make sure that there is nothing obstructing the motors and that they are functioning
normally.
6. Make sure that the DJI Fly is successfully connected to the aircraft.
7. Make sure all camera lenses and sensors are clean.
8. Only use genuine DJI parts or DJI authorized parts. Unauthorized parts may cause system
malfunctions and compromise ight safety.
Basic Flight
Auto Takeo/Landing
Auto Takeo
Use the Auto Takeo function:
1. Launch DJI Fly and enter the camera view.
2. Complete all steps in the pre-ight checklist.
3. Tap . If conditions are safe for takeo, press and hold the button to conrm.
4. The aircraft will take o and hover approx. 1.2 m (3.9 ft) above the ground.