dji MAVIC 3 PRO

DJI Mavic 3 Pro User Manual
92
©
2023 DJI All Rights Reserved.
Settings
Safety
• Flight Assistance
Obstacle Avoidance
Action
Horizontal vision system is enabled after setting Obstacle Avoidance
Action to Bypass or Brake. The aircraft cannot sense obstacles if
Obstacle Avoidance is disabled.
Bybassing Options Select Normal or Nifty mode when using Bypass.
Display Radar Map When enabled, the real-time obstacle detection radar map will be
displayed.
• Return to Home (RTH): tap to set Advanced RTH, Auto RTH Altitude, and to update the Home
Point.
• Flight Protection: tap to set the max altitude and the max distance for ights.
• Sensors: tap to view the IMU and compass statuses and start calibration if necessary.
• Battery: tap to view battery information such as battery cell status, serial number, and
number of times charged.
• Auxiliary LED: tap to set the auxiliary LED to auto, on, or o. DO NOT turn on the Auxiliary
LED before takeo.
• Aircraft Front Arm LEDs: tap to set the aircraft front arm LEDs to auto or on. In auto mode,
the aircraft front LEDs will be disabled during shooting to ensure the quality is not aected.
• Unlock GEO Zone: tap to view information about unlocking GEO Zones.
• Find My Drone: this feature helps to nd the location of the aircraft, either by enabling the
aircraft LEDs, beeping, or by using the map.
• Advanced Safety Settings
Signal Lost The behavior of the aircraft when the remote controller signal is lost
can be set to RTH, Descend, or Hover.
Emergency
Propeller Stop
Emergency Only, indicates that the motors can only be stopped
by performing a combination stick command (CSC) mid-flight in
an emergency situation such as if there is a collision, a motor has
stalled, the aircraft is rolling in the air, or the aircraft is out of control
and is ascending or descending very quickly. Anytime, indicates that
the motors can be stopped mid-ight anytime once user performs a
CSC.
Stopping the motors mid-ight will cause the aircraft to crash.
Airsense An alert will appear in DJI Fly when a manned aircraft is detected if
AirSense is enabled. Read the disclaimer in the DJI Fly prompt before
using AirSense.