dji Phantom 2 Vision + - Toolbar Auto Hide; When Connection Lost; Camera Settings; Preview Quality

DJI VISION App Usage
40
©
2014 DJI. All Rights Reserved.
[
1
]
Toolbar Auto Hide
Slide the switch from left to right to enable this function. Toolbar will auto hide on the camera page.
Figure 91: Toolbar Auto Hide Disabled Figure 92: Toolbar Auto Hide Enabled
[
2
]
When Connection Lost
Figure 93
[
20
]
[
21
]
[
3
]
Camera Settings
iOS users will see an enabled item display in the camera settings toolbar and disabled items will be hidden.
This feature is not available on Android.
3 items displayed
by default
Figure 94 Figure 95
[
4
]
Preview Quality
Figure 96
High: 640 x 480@30fps
Medium: 640 x 480@15fps
Medium: 320 x 240@30fps
Low: 320 x 240@15fps (Recommended when there is a lot of interference.)
[
20
]
Stop Recording:
Enabled: Stop recording if the Wi-Fi connection between
the mobile device and the camera breaks while the
camera is recording.
Disabled: Keeps recording if the Wi-Fi connection
between the mobile device and the camera breaks while
the camera is recording.
[
21
]
Select the state the camera will enter in the event of a Wi-
Fi Connection break between the mobile device and the
camera. Use this function to ensure you can continue
don’t miss out on a shot.
Settings Page