dji PHANTOM 2 VISION - 7 Preparing the Flight Battery; Intelligent Battery and Charger Instructions; Charging Procedures

©2015 DJI. All Rights Reserved. 23 |
7 Preparing the Flight Battery
Before use, please read and follow the user manual, disclaimer, and the warnings on the battery.
Users take full responsibility for all operations and usage.
7.1 Intelligent Battery and Charger Instructions
The intelligent battery is specially designed for the PHANTOM 2 VISION, with a battery capacity of 5200mAh,
voltage of 11.1v and charge-discharge management functionality. The battery should only be charged with the
charger provided by DJI. DJI does not take any responsibility for operation of any charger from a third party.
There are many features provided by the DJI charger:
 Balance charge protection
 Full charge protection
 Short circuit protection
 Output protection
 Sleep protection
 Overheating protection
Intelligent Battery Charger
7.2 Charging Procedures
1.
2.
3.
Connect the battery to the charger while the power is OFF.
Connect the charger to a wall socket. The charger indicator light will turn a solid red when it is charging.
Wait until the charger indicator turns solid green to which indicates that the battery is completely charged.
Wall socket
Charger Indicator
Charger indicator
Status of charge
Charging.
Completely charged.