dji PHANTOM 4 PRO - Page 32

Aircraft
Phantom 4 Pro / Pro+ User Manual
32
©
2017 DJI All Rights Reserved.
Using the Battery
LED1
LED2
Battery Level Indicators
LED3
LED4
Power Button (Built-in LED)
Turning ON/OFF
Turning On:
Press the Power Button once, then press again and hold for 2 seconds to turn on. The
Power LED will turn green and the Battery Level Indicators will display the current battery
level.
Turning
Off:
Press the Power Button once, then press again and hold for 2 seconds to turn off. The
battery power LED will flash when powering off the Phantom to allow automatically
stopping of a recording during the event recording wasn’t stopped.
Checking the Battery Level
The Battery Level Indicators display how much power remains. When the battery is turned off, press
the Power Button once. The Battery Level Indicators will light up to display the current battery level.
See below for details.
The Battery Level Indicators will also show the current battery level during charging and
EJTDIBSHJOH5IFJOEJDBUPSTBSFEFmOFECFMPX
: LED is on. -&%JTnBTIJOH
: LED is off.
Battery Level Indicators
LED1 LED2 LED3 LED4 Battery Level
87.5%~100%
75%~87.5%
62.5%~75%
50%~62.5%
37.5%~50%
25%~37.5%
12.5%~25%
0%~12.5%
=0%