69
screw the intelligent card back.
SNMP
Figure 5 – SNMP card
The SNMP interface card allows you to monitor and control an UPS using an
Ethernet connector.
The required IP address of the SNMP card is installed through the software;
you can receive information about the status of the UPS through the web
interface and manage it remotely.
Its main functions are:
1) Set all functions by browser;
2) Monitor real-time status of UPS by browser;
3) Support protocols such as TCP/IP, FTP, NTP, HTTP, SMTP and SNMP,
etc.;
4) Provide IP search and updating tools (iSearch);
5) Send the daily report by Email;
6) Send related information to administrative personals by Email of there
is any fault for UPS;
7) Add GPRS message module by request of user (message module shall
be purchased additionally).
To Next Page
Loading...