DKC SMALLT1 - Operation Mode

76
5.4 Operation mode
Operation mode and LCD
display
Description
Bypass mode
Turn to bypass mode under the following three
conditions:
 Connect mains power and the bypass setup is
ON.
 Turn off the UPS in line mode and the bypass
setup is ON.
 Overload in line mode.
Note: When UPS is working in bypass mode, it
has no back up function.
Line mode
In case of input mains corresponding to the
working conditions, UPS will work in line
mode, LCD displays ‘Line’.
Standby mode
UPS is powered off and no output supply
power, but still can charge batteries.