DKC SMALLT1 - Operation; Button Operation

72
5. Operation
5.1 Button operation
Figure 8 - Screen with UPS control buttons
Button
Name
Function
“ON” key
Press the two keys for more than half a second
to turn on the UPS.
“OFF” key
Press the two keys for more than half a second
to turn off the UPS.
MUTE key
Press the two keys for more than 1 second in
battery mode: UPS runs the mute function.
TEST key
Press the two keys for more than 1 second in
Line mode or ECO mode or CUCF mode: UPS
runs the self-test function.
SETTING
key
Not in setting mode:
 Press the key for more than 2 seconds:
Function settings interface.
In setting mode:
 Press the key for more than half a second (less
than 2 seconds): go to the function setting
options.
 Press the key for more than 2 seconds: exit
from this function settings interface.