DKS 1838 - Page 3

1838-065-A-9-15
3
Section 3.4 Not Applicable to 1838
Page # Factory Setting
Overview for 1838 Keypad Programming
Section Command
No factory setting
No factory setting
No factory setting
No factory setting
Programming Five-Digit PIN Device Codes
Delete Device Codes
Enabling Facility Codes
Programming Facility Codes
Section 3.6 Programming 5-Digit PIN Device Codes
3.6.1
3.6.2
3.6.3
3.6.4
35
35
35
35
*
70
*
71
*
72
*
73
No factory setting
No factory setting
No factory setting
No factory setting
Programming the Anti-Pass Back Mode
Re-Sync All Devices
Re-Sync Individual Devices
Reset Facility Counter
Section 3.8 Anti-Pass Back
3.8.1
3.8.2
3.8.3
3.8.4
37
37
37
37
*
43
*
45
*
46
*
48
No factory setting
No factory setting
No factory setting
Programming Four-Digit Entry Codes
Delete Entry Codes
Entry Code Ranges
Section 3.7 Programming Four-Digit Entry Codes
3.7.1
3.7.2
3.7.3
36
36
36
*
02
*
02
*
12
Three (3) digits
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
1 (Pause ON)
Programming the Directory Code Length
Programming Directory Code AND 7-Digit Phone Numbers - No Area Code
Programming Area Codes
Programming Phone Numbers that need Area Codes
Deleting Individual Phone Numbers
Delete Area Codes
PBX Line Access Code Programming
Touch-Tone Dialing Pause
Section 3.5 Programming Phone Numbers
3.5.1
3.5.2
3.5.3
3.5.4
3.5.6
3.5.8
3.5.10
3.5.11
32
32
33
33
34
34
34
34
*
20
*
01
*
24
*
41
*
01
*
24
*
09
*
27
060 (60 sec)
010 (relay 1 activates)
Touch-tone
010 (relay 1 activates)
Relay Strike Time
Talk Time
Tone Open Numbers
Switch Input Relay(s) Activation
Touch-tone / Rotary-dial
Rotary Dial-9 Relay(s) Activation
Section 3.3 General Programming using 1838 Keypad
3.3.1
3.3.2
3.3.3
29
29
30
Relay 0: 01 (1 sec)
Relay 1: 01 (1 sec)
Relay 2: 01 (1 sec)
Relay 0: # # # #
Relay 1: 9 8 7 6
Relay 2: 5 4 3 2
*
03
*
08
*
05
3.3.4
3.3.5
3.3.6
30
31
31
*
50
*
07
*
51
No factory setting
1 (255 area codes)
007 (7 sec)
1 (tone ON)
1 (19200 Baud)
0 (activates relay)
1 (Turned ON)
Single 1838
Issued by DoorKing
8-3000 Memory
2-Card w/Anti-Pass Back
Master Code
Number of Area Codes Allowed (needed with remote call station only)
Resident Elevator Button Relay Time
Tone Open Sound ON or OFF
RS-232 Speed Setting
Switch Input Feature
Elevator Control Feature
Single or Multiple 1838s using ONE Phone Line
IM Server OR DKS Cellular Assigned Phone Number or ID Number
Re-Program Memory Size, with/without Cards and Anti-Pass Back
Section 3.2 Setup 1838 for PC Programming
3.2.1
3.2.2
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.2.9
3.2.10
3.2.11
24
25
25
25
26
26
26
26
27
27
*
60
*
36
*
15
*
85
*
18
*
75
*
04
*
59
*
95
Master
Switch ON
NOT Programmable from Software.
Program from 1838 Keypad ONLY.
Note: Program section numbers have been intentionally skipped that DO NOT apply to the specific access controller in this manual. This allows ALL of the
1830 series manuals (1834-065 rev H or higher and 1835-065) to remain in sync with each other when referencing programming numbers.
Quick Guide - 2