1838-065-A-9-15
1
Table of Contents continued on next page
TABLE OF CONTENTS
Important Notices FCC - United States, DOC - Canada
General Information Installation Guidelines and Safety Information
SPECIFICATIONS
SECTION 1 - INSTALLATION
1.1 General Installation
1.1.1 Remove Circuit Board from Enclosure
1.2.1 Install Enclosure
1.2 Mounting Dimensions
1.3 Memory Chip Replacement
1.4 Postal Lock Installation
SECTION 2 - WIRING
2.1 Wiring Guidelines
2.1.1 Power
2.1.2 Wire Runs
2.1.3 Grounding
2.1.4 Surge Suppression
2.1.5 Expansion Boards and Elevator Control
2.1.6 Ferrite Filter
2.2 Terminal Descriptions
2.3 Access Controller Ciricuit Board Wiring
2.3.1 NO Tracker Expansion Boards, Remote Call or Intercom Stations
2.3.2 Tracker Expansion Boards (HARDWired)
2.3.3 Tracker Expansion Boards using Wireless Communication
2.3.4 1838 Wiring to ONE 1838-120 or 1838-121 Remote Call Station
2.3.5 1838 Wiring to TWO 1838-120 or 1838-121 Remote Call Stations
2.3.6 1838 Wiring to a 1504-120 or 1504-121 Intercom Station
2.4 Phone (Voice) and PC (Data) Connection Options
2.4.1 RS-232 Direct Connection - Data Transfer ONLY
2.4.2 RS-232 using RS-422/USB Direction Connection - Data Transfer ONLY
2.4.3 RS-232 using TCP/IP Converter Direct Connection - Data Transfer ONLY
2.4.4 RS-232 using TCP/IP Converter Internet Connection - Data Transfer ONLY
2.4.5 RS-232 using Wireless Point-to-Point Connection - Data Transfer ONLY
2.4.6 DoorKing DKS IM Server - Data Transfer ONLY
2.4.7 RS-232 using VOICE/DATA Cellular System Kit - Voice/Data Transfer
2.4.8 Dial-Up Phone Modem Connection - Voice/Data Transfer
SECTION 3 - PROGRAMMING
3.1 General Programming Information
3.1.1 Programming from a PC
3.1.2 Programming from the 1838 Keypad
3.1.3 Memory Chip Identification
3.2 Setup 1838 for PC Programming
3.2.1 Master Code
3.2.2 Number of Area Codes Allowed (needed with Remote Call Station ONLY)
3.2.4 Resident Elevator Button Relay Time
3.2.5 “Tone Open” Sound ON or OFF
3.2.6 RS-232 Speed Setting
3.2.7 Switch Input Feature
3.2.8 Elevator Control Feature
3.2.9 Single or Multiple Systems
3.2.10 IM Server Client System Phone Number or System ID Number
3.2.11 Re-Program Memory Size, with/without Cards and Anti-Pass Back
Overview for System Keypad Programming
3.3 General Programming using the 1838 Keypad
3.3.1 Relay Strike Time
3.3.2 Talk Time
3.3.3 Tone Open Numbers
3.3.4 Switch Input Relay(s) Activation
3.3.5 Touch-Tone / Rotary-Dial
3.3.6 Rotary-Dial 9 Relay(s) Activation
3
4
-
5
5
6
6
7
8
9
10
10
10
10
11
11
11
11
12
13
13
14
15
16
17
18
19
19
20
20
20
21
21
22
22
23
23
23
23
24
24
24
25
25
25
26
26
26
26
27
27
28
29
29
29
30
30
30
31
Required 1838 Keypad
Programming
1838 Keypad
Programming when
NOT using a PC
To Next Page
Loading...
