DKS 1838 - Page 6

1838-065-A-9-15
2
TABLE OF CONTENTS
3.5 Programming Phone Numbers
3.5.1 Programming the Directory Code Length
3.5.2 Programming Directory Codes with 7-Digit Phone Number - NO Area Code
3.5.3 Programming Area Codes
3.5.4 Programming Directory Codes with Phone Numbers that use Area Codes
3.5.6 Deleting Individual Phone Numbers
3.5.8 Delete Area Codes
3.5.10 PBX Line Access Code Programming
3.5.11 Touch-Tone Dial Pause
3.6 Programming 5-Digit PIN Device Codes
3.6.1 Programming Five-Digit Device Codes
3.6.2 Deleting Device Codes
3.6.3 Enabling Facility Codes
3.6.4 Programming Facility Codes
3.7 Programming Four-Digit Entry Codes
3.7.1 Programming Four-Digit Entry Codes
3.7.2 Delete Entry Codes
3.7.3 Entry Code Ranges
3.8 Anti-Pass Back
3.8.1 Programming the Anti-Pass Back Mode
3.8.2 Re-Sync All Devices
3.8.3 Re-Sync Individual Devices
3.8.4 Reset Facility Counter
SECTION 4 - ADJUSTMENTS
4.1 Master Code Switch
4.2 Ring Pin Jumper
4.3 Relay 2 Jumper
4.4 Speaker Volume, Microphone and Feedback
SECTION 5 - OPERATING INSTRUCTIONS
5.1 User Instructions
5.2 System Administrator
5.2.1 Connecting to the Telephone Entry System from a Remote Location
5.2.2 Expansion Board Override HOLD OPEN Command
5.2.3 Relay Check
SECTION 6 - MAINTENANCE
6.1 Troubleshooting
6.1.1 RS-232 Test
6.1.2 Wiegand Test - Optional LCD Display MUST be Installed
6.1.3 Elevator Control Board(s) Hardware Test - Optional LCD Display MUST be Installed
6.1.4 Elevator Board / Floor Hardware Test - Optional LCD Display MUST be Installed
6.1.5 Automatic Hang-up Options - Optional LCD Display MUST be Installed
6.1.6 Modem Output Level Adjustment
6.1.7 Display IM Server Client Phone Number or System ID Number - Optional LCD Display MUST be Installed
6.1.8 Test Connection to IM Server Client - Optional LCD Display MUST be Installed
6.1.9 Turn IM Server Client Mode ON or OFF
6.2 Accessories
1838 Wiring Schematic
SECTION 7 - LOG TABLES
7.1 Programming Information Tables
7.1.1 10 Area Codes
7.1.2 255 Area Codes
7.2 Resident Information
RESIDENT INSTRUCTION SHEET
32
32
32
33
33
34
34
34
34
35
35
35
35
35
36
36
36
36
37
37
37
37
37
38
38
38
39
39
40
40
41
41
41
41
42
42-43
44
44
44
45
45
45
46
46
46
47
48
49
49
49
50-51
52-53
54
1838 Keypad Programming when NOT using a PC