To Next PageTo Next Page
Need help?Do you have a question about the DKS 6005 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Input Voltage | 220V AC |
| Voltage Resolution | 10 mV |
| Current Resolution | 0.01A |
| Operating Temperature | 0°C to 40°C |
Crucial safety warnings and guidelines for gate operator installation and use.
Guidelines for proper installation of gate operators, including gate and operator suitability.
Details the UL 325 safety classifications for different types of vehicular gate operators.
Steps for assembling the actuator arm and performing a manual release of the gate operator.
Installation layout for a 90-degree swing gate opening inwards, including mounting details.
Installation layout for a 110-degree swing gate opening inwards, including mounting details.
Installation layout for a 90-degree swing gate opening outwards, including mounting details.
Discusses various options and considerations for mounting the gate operator.
Procedures for mounting the 6005 operator, including shaft and bracket installation.
Instructions for mounting the 115 VAC control box and associated wiring.
Wiring and connection guide for dual operator systems, covering both AC and solar power.
Guidelines for mounting the solar control box, including solar panel specifications.
Guidance on properly installing warning signs for gate operator safety.
Information on installing and using in-ground loops for vehicle detection and safety.
Details placement for photo sensors used in the closing direction of the gate.
Details placement for photo sensors used in the opening direction of the gate.
Lists available monitored entrapment protection devices compliant with UL 325.
Details various control box options available for the 6005 gate operator.
Information on plug-in loop detectors that simplify wiring for the gate operator.
Lists various external loop detectors compatible with the gate operator system.
Details DoorKing's loop components for completing the gate operator system.
Information on magnetic locks for securing swing gates and fail-safe operation.
Details on cables used to interconnect primary and secondary operators.
Information on using a 7-day time clock for automatic gate opening.
Details on heavy-duty hinges for ensuring smooth swing gate operation.
Information on prefabricated speed bumps to reduce traffic speed.
