EasyManua.ls Logo

DKV OBU - Flexible Installation; Figure 12: Power Connection for Flexible Installation

DKV OBU
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OBU Manual
Version 3.0 August 27, 2020 18
4.5 Flexible installation
Fixate the power supply cable in such a way that it cannot disconnect while driving the vehicle or
impair a safe operation of the vehicle.
Use the adapter to connect the OBU with the power connection depending on the socket in your
vehicle.
1 DIN standard sockets
2 Cigarette lighter sockets
Figure 12: Power connection for flexible installation
With the ignition switched on / during driving the rechargeable battery will be charged.
In battery mode (connection to the cigarette lighter disconnected) the OBU will be supplied by
the battery for 4 hours.
The battery charge will be shown on the display.
The OBU emits a warning beep, when the user removes the power supply.
Please, consider the battery loading status during driving.
If the battery level goes below 25%: The OBU beeps and shows a warning message. The user has
to press OK to come back to the normal screen.
If battery level goes below 10%: The OBU beeps and shows a warning message. The user has to
press OK to come back to the normal screen.

Table of Contents