OBU Manual
Version 3.0 August 27, 2020 33
5.10 Toll service specifics Austria
INFORMATION ON THE TOLL SERVICE AUSTRIA
Specifications for the toll in the toll service Austria Asfinag (ATasf) can be found under:
www.asfinag.at/toll/go-box-for-hgv-and-bus/european-electronic-toll-service/
Service specific changeable parameters
For the toll domain Austria (ATasf) the driver must update the following parameters on the OBU according
actual state:
• Number of trailer axles
Verification
The driver takes care for the correct installation of the OBU and observes the signalisation of the OBU. In case
of disturbances (sign of malfunction when passing a toll station) the driver must contact the Service Partner.
Buzzer
Each successful transaction is reflected by one buzzer of the OBU when passing a toll station. If the signalisation
does not emit one buzzer, the driver is obliged to go to the next Go Maut Sales Point.
Vehicle declaration
In Austria the driver is obliged to carry a vehicle declaration similar to the following example and to show it in
case of enforcement for identification. He receives this declaration via his Service Partner.
The vehicle declaration must be verified by the user before the usage of the OBU. For each change of vehicle
characterisctics (e.g. license plate number, Euro class) a new vehicle declaration must be delivered by the
Service Partner.
To Next Page
Loading...