OBU Manual
Version 3.0 August 27, 2020 8
2 Quick Start
Start Display of an OBU driving in Germany (DEbag).
When you drive in an area/country where the OBU is activated, then you can always see the active toll service
and your license plate on the display. Weight, axles and Euro emission class are shown if this information is
used in the active toll service, mainly applies
:
• The weight is shown in Germany and Belgium only.
• Number of axles is the sum of tractor and trailer axles, not shown in Belgium.
Choose your language:
1) Press (or any other key) on Navigation button more than 2 seconds to open the main menu.
2) Choose with / language and confirm with
3) Choose with / your language (Deutsch, English, …) and confirm with
4) The OBU beeps to confirm and changes the language.
The driver is responsible to configure the number of axles according to the attached trailer. This can always (at
any location) be done, also when the number of axles are not shown in the „Start Display“.
1) Press (or any other key) on Navigation button more than 2 seconds to open the main menu.
2) Choose with / Axles Trailer and confirm with
3) Choose with / the correct number of trailer axles and confirm with
4) The OBU beeps to confirm. Leave the menu by pressing
In Germany the driver is responsible to configure the weight of the train. This can always be done, also when
the German product is not (yet) activated on the OBU.
1) Press (or any other key) on Navigation button more than 2 seconds to open the main menu.
To Next Page
Loading...