14
3. Operation Instructions
Ensure that the label indicated the correct voltage before connecting the
instrument to power supply
Ensure the socket is properly grounded.
Plug in the power cable，ensure the power is on and begin initializing.
Add the medium into the vessel with an appropriate stirring bar(hotplate
stirrer/stirrer)
Place the vessel on the work plate.
Set the target stirring speed and begin (hotplate stirrer/stirrer).
Observe the stirring bar and LCD display (hotplate stirrer/stirrer).
Set the target temperature and start heating (hotplate stirrer/hotplate).
Observe the actual temperature on LCD display (hotplate stirrer/hotplate).
Stop heating (hotplate stirrer/hotplate) and stirring functions (hotplate
stirrer/stirrer).
If the above operations are normal, the instrument is ready to operate. If there is
any problem during above operations, then instrument may be damaged during
transportation, please contact manufacturer/supplier for technical support.
Магнитная мешалка с подогревом - руководство по
эксплуатации
Диаэм - официальный дилер продукции DLAB в России;
тел.: (495) 745-0508, info@dia-m.ru, www.dia-m.ru
To Next Page
Loading...
