Note) Before removing the printer-driver, if the following error message appears, please reboot the computer. After the
computer has been rebooted, repeat the steps to remove the printer-driver.
(11) Using the Print Server Properties window, confirm that “DS-RX1” has been removed, and click on the “Close”
button.Now the removal of the printer driver is complete. After removal, reboot the computer.
Fig 3.9 Print Server Properties window
2. Installing the printer-driver upgrade
After removing the printer and printer-driver, install the new printer-driver. For installation steps, please refer to
Chapter 1 “Install”.
3. Rebooting the computer
After installation of the printer-driver is complete, be sure to reboot the computer.
( Do not print immediately after installation. First reboot the computer. )
To Next Page
Loading...
