English
- 36 -
How to capture
Turn on the microscope by simply unfolding its display panel to a proper position, normally at
an angle of 90 degree with the viewing end as follows:
Hold the microscope main body by right hand; put the viewing end closely to target object.
Adjust the LED brightness dial to get a proper brightness for the LEDs at the viewing end.
Adjust focus wheel to get clear image by left hand.
Marker for the magnification
When a clear image got, hold the microscope steadily and press Capture button one time.
Using the microscope
darker
brighter
DM mobile4lg.indd 36 26.02.2013 10:04:16
To Next Page
Loading...
