Dobot M1 Script Description
Issue V1.4.3 (2019-10-30) API Description Copyright © Yuejiang Technology Co., Ltd
i
Copyright © ShenZhen Yuejiang Technology Co., Ltd 2019. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Yuejiang Technology Co., Ltd
Disclaimer
To the maximum extent permitted by applicable law, the products described (including its
hardware, software and firmware, etc.) in this document are provided AS IS, which may have
flaws, errors or faults. Yuejiang makes no warranties of any kind, express or implied, including but
not limited to, merchantability, satisfaction of quality, fitness for a particular purpose and
non-infringement of third party rights. In no event will Yuejiang be liable for any special,
incidental, consequential or indirect damages resulting from the use of our products and
documents.
Before using our product, please thoroughly read and understand the contents of this
document and related technical documents that are published online, to ensure that the robotic arm
is used on the premise of fully understanding the robotic arm and related knowledge. Please use
this document with technical guidance from professionals. Even if follow this document or any
other related instructions, Damages or losses will be happen in the using process, Dobot shall not
be considered as a guarantee regarding to all security information contained in this document.
The user has the responsibility to make sure following the relevant practical laws and
regulations of the country, in order that there is no significant danger in the use of the robotic arm.
Shenzhen Yuejiang Technology Co., Ltd
Address: Floor 9-10, Building 2, Chongwen Garden, Nanshan iPark, Liuxian Blvd, Nanshan
District, Shenzhen, Guangdong Province, China
Website: www.dobot.cc
To Next Page
Loading...
