Need help?Do you have a question about the Dobot MOOZ-2 PLUS and is the answer not in the manual?
Overview of the main interface with navigation options.
Interface for automatic and manual leveling and zero point setting.
Interface for browsing and managing Gcode files.
Access to system settings like language, WiFi, and factory reset.
Controls for nozzle/bed preheat, filament loading/unloading.
Controls for laser intensity and switching.
Controls for CNC spindle speed and switching.
Interface for setting X, Y, Z axis zero points and fine-tuning.
Controls for manual movement of X, Y, Z axes and resetting.
Real-time monitoring and control of printing/engraving/carving process.
Procedure for manually defining a plane parallel to the heated bed.
Procedure for setting the starting point for printing, including fine-tuning.
Guide to using third-party slicing software like Cura for preparing models.
Step-by-step instructions for installing slicing software, e.g., Cura.
Configuring slicing software with machine settings for MOOZ-2 PLUS.
Overview of model profiling and layer view features in slicing software.
Procedure for printing files directly from a USB drive.
Real-time control of printing speed, pause/resume, filament change, and abort.
Functionality to save and resume printing after power interruption.
System for detecting filament absence and pausing the print.
Tips and considerations for printing with flexible filaments like TPU.
Securing the workpiece and installing the laser engraving module.
Procedure for setting the zero point for laser engraving operations.
Guide to using software to create G-code for laser engraving.
Steps for installing the CNC platform and securing the workpiece.
Procedure for installing the CNC carving bit into the chuck.
Procedure for setting the zero point for CNC carving operations.
Guide to using software to create G-code for CNC carving.
Instructions for transferring G-code files to the machine via WiFi.
Controlling machine axes and operations via USB connection.
Common issues and solutions related to 3D printing.
Troubleshooting for general machine malfunctions.
Specific troubleshooting for the 3D print module.
Instructions for disassembling the 3D print module.
General| Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Printing Speed | 10 - 80 mm/s |
| Connectivity | USB, SD Card |
| Auto Leveling | Yes |
| Operating Voltage | 100-240V AC, 50/60Hz |
| Frame Material | Aluminum Alloy |
| Supported Materials | PLA, ABS |
To Next Page
