MAINTAINING YOUR VEHICLE 291
7
License Plate Lamps
(Cargo/Passenger Vans Only)
1. Press the bulb socket to the left, against the force of
the spring, and remove.
2. Replace the bulb, C5W – 12V 5W.
3. Install the cover.
4. Re-install the bulb socket.
Additional Brake Lamp
(Cargo/Passenger Vans Only)
(1) Retaining screws
1. Take out the retaining screws (1) and remove the
lamp housing.
2. To change a bulb, P21W – 12V 21W
Press the bulb into the bulb socket, turn it
counterclockwise and remove.
3. Insert the new bulb.
4. Install the lamp housing.
To Next Page
Loading...
Need help?
General
