Dodge Sprinter 2006 Owner's Manual

MAINTAINING YOUR VEHICLE 295
7
Exit Lamps (Optional)
(1) Lamp housing
(2) Cable connector
(3) Bulb holder
1. Use a screwdriver on the catch spring to remove the
lamp housing (1).
2. Press the locating spring on the cable connector (2),
hold it down, and remove the cable connector (2).
3. Turn the bulb holder (3) to the left and remove it.
4. Replace the bulb, W5W - 12V 5W.
5. Install the bulb holder (3) and attach the cable
connector (2).

Dodge Sprinter 2006 Specifications

General

Brand	Dodge
Model	Sprinter 2006
Category	Automobile
Language	English